The Precision CNC Titanium X Swashplate is designed to improve stability, durability and overall performance on the Blade 130 X helicopter. It's directly replaced the stock plastic swashplate and also allows pilots to use the Aluminum/Carbon Fiber Anti-Rotation Guide set MH-130X311 to re-position Anti-Rotation Pin for swashplate tilting linearly and precisely in all directions.
The Precision CNC Titanium X Swashplate is machined with high tolerance from aircraft aluminum 6061 to achive the best possible precision and using high quality selected main ball bearing to minimize any unwanted slops and plays between upper swash and lower swash.
More than that, the Precision CNC Titanium X Swashplate is technically re-engineered center ball in line with swash arm balls to allow swashplate tilting linearly and precisely which produces the most accurate and fast cyclic response and cyclic power on Blade 130 X flybarless head system.
And yet, the Precision CNC Titanium X Swashplate is designed using all threaded Titanium ball joins and Titanium anti-rotation pins to prevent wear and tear for long time use. It is thin profile, more tilt angle and very light weight 2.61gram on this version (only 0.57g heavier than stock plastic swashplate).
The Precision CNC Titanium X Swashplate design will bring the best overall performance and the stylish look to your Blade 130 X helicopter.
|2 x Precision CNC Aluminum Swash (GREEN) (upper swash and lower swash)|
|1 x High Quality Selected Main Ball Bearing|
|3 x 3mm Short Threaded Titanium Ball Joint|
|2 x 3mm Long Threaded Titanium Ball Joint|
|1 x 1.5x6mm Short Titanium Anti-Rotation Pin|
|2 x 1.5x12.5mm Long Titanium Anti-Rotation Pin (removable)|
|1 x Aluminum Center Ball|
|1 x Delrin Insert|
|100% CNC machined Aluminum Swashes, Aluminum Center Ball, Threaded Titanium Balls, Titanium Pins and Delrin Insert|
|Improves stability, durability and overall performance on flybarless head system|
|Accurate and fast cyclic response and cyclic power|
|Using high quality selected main ball bearing to minimize slops and plays between upper swash and lower swash|
|Re-engineered center ball in line with swash arm balls|
|Re-engineered anti-rotation pin for swashplate tilting linearly and precisely in all directions|
|Using threaded Titanium balls and Titanium pins to prevent wear and tear|
|Thin profile, more tilt angle, light weight and stylish Precision CNC Titanium X Swashplate design|
|2.61gram (included 2 Titanium Pins)|
|Direct replacement part for Blade 130 X helicopter|
|Read and follow carefully the Assembly Instruction|
|Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly|
|Manual & Instruction included|